ตะกร้าสินค้า
/

SIMPLUS Air Circulator Fan XHSH003 User Manual

Ⅰ. Product Parameters

Product Name

MODEL NO

Rated Power

Rated Voltage

Rated Frequency

Air Circulator Fan

FX-L36

50W

220-240V~

50-60Hz

 

 Ⅱ . Product Illustration

 

①Front Net

②Aromatherapy Lid

③Blades    

④Control Panel

⑤Plastic Pipe

⑥Back Net

⑦Main Unit

⑧Base

 

III. Operation Instruction

Please place the product on a horizontal surface for use; do not place it at an angle or upside down.

The fan should not be forcibly adjusted to change the direction of the fan head, to avoid damaging the internal structure.

 

1.Installation method:

Open the box and remove all accessories.

① Rotate the triangular nut at the bottom of the column tube counterclockwise to remove it;

② Insert the lower column tube into the plastic tube hole in the base plate;

③ Rotate the triangular nut clockwise to secure the base plate and lower column tube;

④ Screw the upper column pipe clockwise into the lower column pipe;

③ Screw the main body clockwise into the upper column tube.

Note: You can choose not to install the plastic pipe or install one pipe according to your desired height.

 

 

 2. Usage Instruction

After assembling the fan and accessories, plug it into a proper power supply and turn the knob to the desired fan speed setting.

Vertical swing: Press this button after the fan starts to turn on the vertical swing function. Press it again to turn off this function.

 

3.Control Panel

①Vertical Swing

②High-Speed Horizontal Swing

③Medium-Speed Horizontal Swing

④Low-Speed Horizontal Swing

⑤Turn Off

⑥Low Speed

⑦Medium Speed

⑧High Speed

 

4.Essence Addition Method

① Rotate the aromatherapy lid counterclockwise to remove it;

② Drip the essence onto the aromatherapy pad;

③ Rotate clockwise to attach the aromatherapy lid. 

 

 

IV. Cleaning and Maintenance

  1. Before cleaning, unplug the power cord and allow the device to cool down.
  2. Please wipe the exterior of the machine with a damp towel. Do not submerge the entire unit in water or rinse it under a faucet.
  3. Do not clean with steel wool, abrasive cleaner, or corrosive liquid.
  4. Please allow all product components to dry completely before storing.
  5. This product should be stored in a dry, cool place during prolonged storage. Keep away from dust, high temperatures, and direct sunlight.

 

Ⅴ. Cautions

To ensure safety, this product has complied with all applicable standards and regulations. Before using this product, please read the user manual carefully and keep it in a safe place for future reference.

  1. This product is not suitable for use by persons with physical, cognitive, or mental impairments, or those lacking knowledge or experience, including children, unless under the direct supervision and guidance of a responsible adult.
  2. Do not allow children to play with this product.
  3. Keep this product and the power cord out of the reach of children.
  4. Before use, ensure the marked voltage matches your local mains supply. Only use the original or manufacturer-specified power cord and charger.
  5. Do not use if the plug, power cord, or product is damaged. Do not disassemble or modify the product yourself. Please contact customer service immediately if any problem occurs.
  6. Do not plug or unplug the power cord or operate the device with wet hands.
  7. If smoke, unusual odors, excessive heat, deformation, or other problems occur during operation or charging, immediately disconnect the power and cease use. Contact customer service if necessary.
  8. This product is only suitable for household use. It is prohibited for commercial or professional use or functions other than those labelled in the manual. If the operation is not carried out in accordance with the instructions in the manual, the warranty will be invalid and the manufacturer will not be responsible for any losses.
  9. This product must be used under supervision, and it is prohibited to operate the device when no one is around. Please disconnect the power supply before leaving/ assembling / disassembling / cleaning / repairing.
  10. Please connect the power supply after the fan is fully installed. Disconnect the power supply before moving the fan.
  11. Do not insert fingers or sharp objects into the grille while the fan is running.
  12. Please avoid using this product in environments with high temperature, high humidity, or excessive dust, smoke, or other particulate matter. Keep the product at least 1 meter away from items that may absorb it, such as curtains, and keep it away from fire sources and combustible materials.
  13. Babies and the elderly should not be directly exposed to strong winds for long period of time.
  14. Do not place the fan on an inclined surface to prevent it from tipping over.
  15. Do not forcefully pull the product's swivel structure to avoid damaging it.
  16. Do not use this product around bathtubs, showerheads, or swimming pools.

 

Ⅵ. Common Problems

Common Problems

Possible Reasons

Solution

Unable to power on

Power plug not inserted or not in place

Reinsert the plug into the socket.

The power socket is not powered on

Turn on the switch of the socket or replace the power socket

The screen's power button is not turned on

Turn on the power button, then press it again

The fan is not working

Please contact customer service to resolve it

Motor terminal connections are loose

Please contact customer service to resolve it

Main control board failure

Please contact customer service to resolve it

Product overheating

Continuous operation time is too long

Rest for 60min before using again

The front or back net accumulates a lot of dust

Clean dust from the front and back net

Abnormal noise

The device is not placed on a stable surface, causing vibration-induced noise transmission.

Place the fan on a stable surface or position a shock-absorbing pad beneath the device to reduce vibration transmission and prevent resonance noise.

The fan blades damage

Check if the fan blades are damaged. Please contact customer service to resolve it

The wind speed is low

Gear not shifted

Press the fan button to select the desired speed setting.

The front or back net accumulates a lot of dust

Clean dust from the front and back net

The back net is positioned too close to the obstacle.

Move the device to an open area

Unable to swing

The vertical swing button is not turned on

Press the vertical swing button