Ⅰ. SPECIFICATIONS

Ⅱ.PRODUCT ILLUSTRATION

1. Measuring glass
2. Stir the lid
3. Mix the cup lid seal
4. A mixing cup
5. Blade mixers
6. Knife seat seal
7. Knife holder fixed plate
8. Coaster
9. Main body cover
10. Start switch
11. Connectors below
12. Pulse switch
13. Speed control knob
14. Timer knob

Ⅲ.Operation Instructions

1.Function panel description  

Enable switch ：

After the mixing cup is properly assembled, press the start switch; the machine starts to run;

Pivot switch：

After the mixing cup is properly assembled, press the pulse switch, the machine starts to run, release the point switch, the machine stops running;

①"0" Gear: Power Off/Standby Gear

Function: Indicates the device is in the off or standby state, serving as the safe initial gear of the food processor.

② "Ⅱ" Gear: High-Speed Working Gear

Function: The second gear, typically used for high-speed stirring/crushing (In some models, "Ⅰ" is the low-speed gear and "Ⅱ" is the high-speed gear; when there is no "Ⅰ" gear, "Ⅱ" serves as the default working gear).

Caution: Hold the cup lid firmly during operation to prevent the lid from popping up or ingredients from overflowing, ensuring operational safety.

Speed control switch:

When the machine is running, the speed can be adjusted to control the speed of the machine;

Timer knob:

Before commencing operation, select the required working duration; upon pressing the start switch, the machine will operate for the preset time and automatically cease functioning once the time has elapsed.

2.Operation instructions                                    

With safety in mind, unless the blending jar is positioned correctly and locked in place, the blender will not operate.

For correctly assembling the blender, operate as follows:

1. Place the main body on the table, with the front facing toward you.
2. Place the mixing cup assembly on the main body, with the handle of the cup on the right side. Align the cup handle downward and put it into the main body according to the position of the cup pad.
3. Now the blender is ready for use.

3.Blender Usage Guide

Note: Processing time varies depending on the amount of ingredients in the blending cup, and the recommended time is for reference only.

3.Handy Blending Hints                                    

• Food items for blending should be cut into cubes (approximately 2-3cm), this will assist in achieving an even result.
• When the ingredient volume is ≥1.6 litres, the ‘Mid’ speed setting must be used for blending. During blending, the lid must be manually pressed down to prevent ingredients from spilling over.
• To ensure efficient mixing when blending dry mixtures, it may be necessary to stop the blender and push ingredients down the sides of the jar with a spatula.
• When pureeing fruit or vegetable, cooked or raw, cut into small pieces to facilitate blending.
• When blending a variety of ingredients together, blend the liquids, first, then add dry ingredients.
• Always ensure stones are removed from fruit and bones from meat as these can harm the blades.
• Do not process hot liquids in your blender. Allows it to cool before processing.
• Always ventilate the Stir the cup when pureeing warm ingredients. This is achieved by lifting the measuring cup out of the lid, after starting the blender.

Ⅳ. Cleaning and Maintenance

1. Half fill the blender with warm and a small amount of detergent.
2. Turn to the ‘Pulse’ function and hold for 1-2 seconds and release. Repeat 3-4 times.
3. Then remove the Stir the cup and rinse it under running water.
4. For thorough cleaning, wash the Jar lid, the Small measuring cup, and the Stir the cup in warm soapy water.
5. Rinse the disassembled the Blade base and the sealing ring under running water.
6. The Small measuring cup, the Jar lid and the Stir the cup can be washed in the dishwasher.
7. When cleaning the cup, it is recommended to use the ‘Mid’ setting with a water volume of 700–900 millilitres.
8. Allow all components to air dry, then reassemble the clean parts in the reverse order of disassembly. Do not forget to refit the sealing ring and ensure the blade assembly is correctly installed.

Caution: Take care when cleaning the blades as they are extremely sharp. Below the mixing cup, use a special tool to hold the fixed plate, and then turn counterclockwise to remove the mixing blade group from the mixing cup.

To clean the motor base

• Use a damp, soft sponge with detergent and wipe over the motor base.
• Note: Never immerse the motor base in water.

Storage

• 1. Coil the power cord around the cord storage at the bottom of the motor base.
• 2. Store in a cool and dry place.

Ⅴ. Precautions

1. Read all instructions carefully before using the appliance.
2. Align the main body with the base before placing it in position. Failure to do so may cause wear to bottom components, though it will not affect normal use.
3. Disconnect the power supply if the appliance is left unattended, or before assembly, disassembly, and cleaning.
4. Children are prohibited from using this appliance. Keep the appliance and its power cord out of children's reach.
5. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a qualified professional to avoid hazards.
6. Exercise caution when handling sharp blades, emptying the bowl, and cleaning the appliance.
7. Turn off the appliance and disconnect the power before replacing accessories or touching moving parts during operation.
8. Application Scope: This appliance is suitable for home and similar scenarios, such as: staff kitchen areas in stores, offices, and other workplaces; farmhouses; customer use in hotels, motels, and other residential environments; and bed-and-breakfast settings.
9. Keep fingers away from the blades during use.
10. Do not blend hot ingredients.
11. Always operate on a flat surface.
12. Ensure the control knob is in the "0" (off) position before inserting the power plug into the socket.
13. Do not operate for more than 2 minutes at a time.
14. Read and retain all instructions provided with the appliance.
15. Turn off the power at the socket before inserting or removing the plug. Grasp the plug when unplugging—do not pull on the cord.
16. Do not use the appliance with an extension cord unless it has been inspected and tested by a qualified technician or service personnel.
17. Use a power socket with a voltage (AC only) that matches the rating marked on the appliance.
18. Do not use the appliance for any unintended purpose.
19. Do not place the appliance on or near a gas flame, electric heating element, or hot oven, or on top of other appliances.
20. Keep the appliance's power cord from hanging over table or workbench edges, or touching any hot surfaces.
21. Do not operate the appliance if the power cord is damaged, or if the appliance has been dropped or damaged.
22. Do not immerse the appliance in water or other liquids unless otherwise recommended.
23. Do not touch the blades when the appliance is plugged in.
24. Exercise extreme caution when emptying and cleaning the blender cup, as the blades are extremely sharp.
25. For instructions on cleaning food-contact surfaces, refer to the "Maintenance and Cleaning" section.
26. For instructions on operation time, refer to the "Blender Usage Guide" section.
27. Do not rinse or immerse the base unit in water.
28. If the machine stops suddenly due to overloading during use, unplug the power supply and wait for it to cool before restarting.
29. This product is not suitable for persons with physical, cognitive, or mental impairments, or those lacking knowledge/experience, including children, unless used under the supervision of a responsible person.
30. Do not allow children to play with this product.