SIMPLUS Electric Iron GTJH024 User Manual

Ⅰ. Product Parameters

 Ⅱ . Product Illustration

①Spray Button

②Steam Adjustment Button

③Water Inlet

④Ironing Panel

⑤Explosion Steam Button

⑥Temperature Control Knob

⑦Handle

⑧Power Cord Protective Casing

⑨Indicator Light

⑩Water Tank

Ⅲ． Operation Instruction

First Use

1. Remove the protective film from the steam bottom panel before first use.
2. Please wipe the steam bottom panel and the inside of the tank with the clean tissue to check for any residual impurity or oil.

Cautions: Some parts may have a small amount of lubricating grease, so it is normal that smoke may be produced when first used.

3. Distilled or purified water is recommended. Do not add any cleaning solutions, essential oils or chemicals.
4. To be used and placed on a stable surface.

Usage Instruction

1.Water filling operation(for steam ironing)

Holding the middle part of the iron, open the tank lid and add water to the tank until the water level is aligned with the MAX line and then close the lid tightly.

2.Temperature adjustment

Place the electric iron upright and select the corresponding temperature with the temperature control knob ⑥, then connect the power supply.

Please select the corresponding steam temperature level according to the classification of clothing materials:

• First gear: Chemicalfiber  
• Second gear: Silk / Wool
• Third gear: Cotton / Linen
• MAX: Jean/Thick cotton linen

Since the heating rate of the electric iron is much faster than the cooling rate, it is recommended to iron temperature-sensitive materials first (low temperature gear).The following form shows the corresponding functions.

When indicator light ⑨ is on, it indicates that the device is heating. When the indicator light is off, the set temperature has been reached and ironing can begin.

3.Core function

• Spray function: Press the Spray button ①to spray water mist onto the garment to increase humidity for ironing and styling.
• Dry ironing / Steam ironing switch: Adjust the steam intensity with the steam adjusting knob ②, "0" gear for dry ironing mode (no steam output), turn to the max gear for max steam output mode.
• Explosionsteam function: When the iron is in second, third and MAX gears, press the explosive steam button ⑤ to release explosive 

Cautions:

1.This function can only be used when the electric iron is on the power steam setting;

2.Do not press the button more than 3 times in succession.

• Anti-drip function: When ironing fragile fabrics such as leather, lace, etc., please always use the low temperature setting, and the anti-drip function is automatically activated.

It stops water droplets from forming during the ironing process, ensuring that clothes will not be damaged or soiled when ironing fragile fabrics.

Cautions:

1. Do not aim at people, animals or flammable objects.
2. Never iron the clothes you are wearing.
3. Take care to prevent steam sprays when using the device.
4. Do not touch the high-temperature steam or the steam panel with your hands during ironing.
5. Do not place the machine directly on the surface of objects such as glass that are not heat-resistant to avoid danger.
6. It is recommended to use the electric iron on a breathable ironing board.

Ⅳ． Cleaning and Maintenance

1. Before cleaning, unplug the iron from the power supply, place the iron in an upright position, allow it to cool down completely, and then empty accumulated water in the water tank.
2. Please wipe the exterior of the machine with a damp towel. Do not submerge the entire unit in water or rinse it under a faucet.
3. Residues on the steam bottom panel can be removed with a solution of edible vinegar in water (ratio 1:10); wipe the body of the machine with a dampcloth and finally dry it.
4. Do not clean with steel wool, abrasive cleaner, or corrosive liquid.
5. Please drain the tank when storing.Allow all product components to dry completely before storing.
6. This product should be stored in a dry, cool place during prolonged storage. Keep away from dust, high temperatures, and direct sunlight.
7. Auto-clean function (operated once every six months for deep cleaning of the steam bottom panel)

• Fill the water tank with water, set the temperature to MAX, connect to the power supply, long pressthe auto-clean button for about 1 minute to dry the residual water in the bottom panel;
• When cleaning, you need to place a water basin underneath to collect sewage, to prevent hot water splashing out and scalding.

      8. Regular cleaning (recommended 1 time per month, adjusted for frequency of use)

• Add half a tank of water to the water tank, place the electric iron upright, turn the temperature control knob ⑥to MAX gear and connect the power supply;
• Wait for the iron to heat up completely (indicator light goes out) then unplug and hold the iron horizontally over the washbasin;
• Turn the steam adjusting knob ②to the max gear. At this time, the device will spray hot water and steam, and residues such as limescale (if any) will be discharged with the water flow;
• Shake gently from side to side with the panel facing down until the tank is almost empty of water;
• .Connect the power supply and turn the temperature control knob to 'MAX' again, let the iron reheat for 1-2min, the residual water in the water tank will be vaporised and discharged through the device, please keep away from the steam outlet to prevent scalding.

Ⅴ. Cautions

To ensure safety, this product has complied with all applicable standards and regulations. Before using this product, please read the user manual carefully and keep it in a safe place for future reference.

1. This product is not suitable for use by persons with physical, cognitive, or mental impairments, or those lacking knowledge or experience, including children, unless under the direct supervision and guidance of a responsible adult.
2. Do not allow children to play with this product.
3. Keep this product and the power cord out of the reach of children.
4. Before use, ensure the marked voltage matches your local mains supply. Only use the original or manufacturer-specified power cord and charger.
5. If the plug, power cord or the product itself is broken, cracked, leakage, etc., it is prohibited to use. Do not disassemble or modify the product by yourself. If there is any abnormality, please contact customer service in time.
6. Do not plug or unplug the power cord or operate the device with wet hands.
7. If smoke, unusual odors, excessive heat, deformation, or other problems occur during operation or charging, immediately disconnect the power and cease use. Contact customer service if necessary.
8. This product is only suitable for household use. It is prohibited for commercial or professional use or functions other than those labelled in the manual. If the operation is not carried out in accordance with the instructions in the manual, the warranty will be invalid and the manufacturer will not be responsible for any losses.
9. This product must be used under supervision, and it is prohibited to operate the device when no one is around. Please disconnect the power supply before leaving/ assembling / disassembling / cleaning / repairing.
10. Do not let your skin touch the hot components directly, and be careful to prevent scald.
11. Do not immerse the steam iron in water. Avoid the power cord touching the hot steam bottom panel.  
12. Do not use chemical additive, aromatic or disincrustant.
13. If the inner temperature controller fails, the power supply will be cut off automatically to prevent the iron from overheating. Please contact customer service if this happens.
14. Be sure to disconnect the power supply in the following use cases:

(1) When you need to leave during use (especially when there are children around);

(2) Before filling the water tank;

(3) Before cleaning the tank;

(4) After each use.

15. During use, please be careful to avoid the high-temperature steam sprayed by this product.

Ⅵ. Common Problems