Ⅰ. Product Parameters
|
Product Name |
MODEL NO |
Rated Power |
Rated Voltage |
Rated Frequency |
|
Electric Mixer |
CX-6651-2 |
300W |
220-240V |
50-60Hz |
Ⅱ. Product Illustration

- Speed Control Knob
- Main unit
- Egg Beater
- Dough Roller
- Eject Button (EJECT)
- Pulse Mode (TURBO)
Note: When installing the dough roller and egg beater, ensure the rod with the white attachment is inserted into the left slot, while the other rod is inserted into the right slot. Reverse installation may cause food entanglement and damage the machine.
Ⅲ . Operation Instruction
Usage Instruction
- Insert the egg beater into the slot and gently turn it until it clicks into place.
- Plug the blender into an outlet. Once powered on, the blue light will illuminate.
- The initial switch position is set to “0”, indicating the machine is not running.
- Dip the egg beater into the mixture and slide the speed control switch to the desired rotational speed.
- Once the desired consistency is achieved, slide the speed control switch to the “0” setting. After the egg beater has completely stopped rotating, unplug the blender.
- Press the “EJECT” button to eject, remove the egg beater, and store it properly.
Gear Introduction
|
Rotational Speed (SPEED) |
Recommended Use (DESCRIPTION) |
|
1-2 gear |
Low-speed for stirring the egg mixture and butter |
|
3-4 gear |
Medium-speed for mixing dough and filling |
|
5 gear |
Whip cream and egg white |
|
Pulse (TURBO) |
One-touch to maximum rotational speed for rapid whipping |
Recommended Recipe
|
Equipment / Function |
Capacity |
Time |
|
Dough Roller - Yeast Dough |
Maximum 500g flour + 300g water |
3 minutes |
|
Egg Beater - Mashed Potatoes |
Maximum 750g |
3 minutes |
|
Electric mixer - Whipping cream |
Maximum 800g |
3 minutes |
|
Electric Mixer - Egg mixture |
Beat 3 to 17 eggs |
1 minute |
Note:
- To prevent splashing, place the egg beater or mixing hook into the batter before starting the appliance.
- Set the rotational speed according to the type of ingredient. Always start operation at low speed, then gradually increase the rotational speed. When the mixture thickens during processing, switch to a higher speed setting to increase power.
- To prevent motor overheating, the equipment must not operate continuously for more than 7 minutes. After 7 minutes, it must be shut down for cooling. The shutdown period must be no less than 5 minutes, until the motor cools to room temperature. Pulse Mode (TURBO): Do not use continuously for more than 1 minute.
Ⅳ . Cleaning and maintenance
- Before cleaning, unplug the power cord and allow the device to cool down.
- Wipe the exterior of the unit with a damp towel. Do not submerge the entire unit in water or rinse it under a faucet.
- Before cleaning the egg beater and dough roller, remove them from the blender first.
- Do not clean with steel wool, abrasive cleaner, or corrosive liquid.
- Take extra care when handling sharp cutting blades, emptying containers, and during cleaning procedures.
- Please allow all product components to dry completely before storing.
- This product should be stored in a dry, cool place during prolonged storage. Keep away from dust, high temperatures, and direct sunlight.
- Do not place the product in the dishwasher for cleaning.
Ⅴ . Cautions
- Before use, ensure the marked voltage matches your local mains supply. Only use the original or manufacturer-specified power cord and charger.
- Please allow all product components to air dry completely before storing.
- Do not use if the plug, power cord, or product itself is damaged. Do not disassemble or modify the product yourself. Contact a professional repair service.
- Do not leave the mixer unattended while it is in operation.
- Avoid contact with operating parts. During operation, keep hands, clothing, and equipment such as scraper away from the beater to reduce the risk of injury or damage to the equipment.
- To prevent the risk of electric shock, do not immerse the blender, power cord, or plug in water or other liquids. This action may result in personal injury or product damage.
- Do not allow the power cord to hang over the edge of a table or countertop, and do not let the power cord come into contact with high-temperature surfaces (including stoves).
- Do not use this device outdoors.
- Before replacing parts or touching moving components, turn off the power switch and disconnect the power supply.
- Always disconnect the power supply to the equipment when it is unattended, and before assembly, disassembly, or cleaning.
- This product is for household use only. If this product is used improperly, for professional or semi-professional purposes, or not in accordance with the instructions in this manual, the warranty for this product will be void, and the company shall not be liable for any damages resulting therefrom.
- This product is not suitable for use by persons with physical, cognitive, or mental impairments, or those lacking knowledge or experience, including children, unless under the direct supervision and guidance of a responsible adult.
- Do not allow children to play with this product.
Ⅵ. Common Problems
|
Fault Symptoms |
Cause Analysis |
Solution |
|
No response when pressing the power switch after connecting the power supply |
Power cord not fully inserted or outlet has no power |
Plug the power cord securely into the outlet or try a different outlet. |
|
Unpleasant odor emitted by the motor during initial uses |
Normal initial operation of new motor |
If an odor persists after multiple uses, contact customer service for assistance. |
|
Unintended shutdown during operation |
Insufficient voltage |
Check if the voltage is too low. |
|
Beater detaches |
Beater not properly installed into main unit's beater hole |
Align the whisk attachment with the whisk port on the main unit and insert it until you hear a click, indicating it is properly secured. |
|
Beater eject button cannot be pressed |
Speed setting not adjusted to 0 |
Set the speed dial to the 0 position before pressing the button. |